Installing a Brick Paver Walkway or Calcium Silicate Brick

The use of Bricks or Pavers to produce a pathway or outdoor patio matches a home in a method that is unequaled. In addition, setting up a Brick or Paver sidewalk does not always require a pro.

The key to installing a Brick or Paver Walkway is to very first properly prepare the location where the bricks/pavers are to be installed. The location needs to be removed a minimum of a foot down, getting rid of all topsoil and clay soil. In addition, string lines need to be strung on each side of the sidewalk. The string lines show the ended up height of the pathway.
As soon as the area has been dug, 3/4" gravel stone should be laid in and tamped down securely. 2" of sand, or stone dust must be spread out over the gravel. Again the sand/stone dust ought to be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline ought to equate to the density of the brick or paver.

Now that you have a stable base, position a 1" pipe or ledger board the length of the pathway on either side of the walkway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared area. These strips will act as your pathway border and aid to maintain the stability and shape of the sidewalk.

Once this is done, you can then begin to lay the bricks/pavers. There are many patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the integrity of the pathway.

Inevitably bricks/pavers will need to be cut or split when building the sidewalk. Unless you want to purchase or rent a pricey wetsaw, I would recommend buying a simple brick/paver splitter. It is essentially a sculpt with a broad end that is the width of the bricks/pavers. To really cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you wish to break the brick. Utilizing a hammer strike the butt end of the chisel strongly. here You may require to do this a couple of times. You might likewise wish to turn the brick/paver over and strike the light weight bricks machine other side of the brick utilizing the hammer and chisle. Within a couple of strikes the brick/paver need to break easily. If your walkway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, build up the outside edges with additional sand, and after that shovel in the topsoil and load down strongly.
Spread stone dust over the new pathway and sweep into the cracks. Repeat this process a number of times to guarantee the fractures are totally filled. This will complete the interlocking of the bricks and help to get rid of any weed development. Simply include yard seed to the outdoors edges and you need to have a gorgeous entryway to your home within a number of weeks.


In addition, installing a Brick or Paver sidewalk does not always require a pro. The key to installing a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be installed. Now that you have a steady base, position a 1" pipe or journal board the length of the walkway on either side of the walkway. These strips will act as your sidewalk border and aid to preserve the integrity and shape of the walkway. Undoubtedly bricks/pavers will need to be cut or divided when developing the sidewalk.

Leave a Reply

Your email address will not be published. Required fields are marked *