The use of Bricks or Pavers to produce a pathway or patio complements a home in a way that is unequaled. In addition, installing a Brick or Paver walkway does not necessarily need a pro.
The secret to installing a Brick or Paver Walkway is to very first properly prepare the location where the bricks/pavers are to be installed. The location should be dug out a minimum of a foot down, removing all topsoil and clay soil. In addition, string lines must be strung on each side of the sidewalk. The string lines indicate the completed height of the pathway.
Once the area has been dug down, 3/4" gravel stone should be laid in and tamped down tightly. The height between the tamped down sand and the stringline ought to equal the thickness of the brick or paver.
Now that you have a stable base, place a 1" pipe or ledger board the length of the walkway on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.
Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared area. These strips will function check here as your sidewalk border and assistance to preserve the integrity and shape of the walkway. You can get these plastic strip borders at many home enhancement shops. The strips must be anchored down with 12" galvinized nails. You must sink these nails into the ground and through the strips every foot.
The secret to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will again assist preserve the stability of the pathway.
Undoubtedly bricks/pavers will need to be cut or divided when constructing the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over read more the spot where you want to break the brick. If your walkway has curves you will need to buy/rent a wetsaw.
After setting up the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and pack down firmly.
Spread stone dust over the new walkway and sweep into the fractures. This will finish the interlocking of the bricks and assist to more info get rid of any weed development.
In addition, setting up a Brick or Paver walkway does not necessarily need a pro. The secret to setting up a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipe or ledger board the length of the walkway on either side of the sidewalk. These strips will act as your pathway border and assistance to maintain the integrity and shape of the walkway. Inevitably bricks/pavers will need to be cut or divided when developing the walkway.